GLOW IN THE DRAK EGRESS MARKING TAPE

Heskins® glow in dark egress tape is produced in plain or chevron hazard format. During the daylight or lights scenario, glow-in-the-dark marking tape is a mild green color; it immediately releases a highly noticeable bright glow in a lights-out situation. The light emitted is stored as energy when the tape is exposed to a light source; this can be natural or artificial lighting.

Benefits

Our glow-in-the-dark egress hazard marking tapes do not use radioactive materials or components that breach state, federal, or international standards. The photoluminescent powders are impregnated into the upper surface; these powders have an indefinite lifespan and can be recharged over and over for the duration of the tape's lifespan.

Underneath the top film, we apply a permanent self-adhesive with a heavy coat weight. The adhesive is exposed by removing the protective backing paper and then simply sticking it down onto any surface that is clean, dry, and free from any grease. We recommend using our surface primer before applying it to porous surfaces (wood, concrete, stone, etc.).

Application

With this being a smooth tape, its primary use is for marking many areas as a hazard marking tape.

Doorways

Marking doorways, particularly door frames, allows exit and entry points to be found in low light or lights-out situations. Glow-in-the-dark marking tape can be applied in seconds and is ready immediately.

Low Edges

Applying glow-in-the-dark hazard marking tape to low edges can prevent head injuries in low to no-light situations. It is a very efficient use, as only a tiny amount of tape will be required to mark the area as hazardous.

Stairways

Ensuring stairways and their steps are completely visible is not always easy, but by using glow-in-the-dark hazard marking tape, you can highlight the stairway and every step to ensure no missteps.

Light Switches

Finding light switches in the dark can be very troublesome for many. Applying glow-in-the-dark marking tape on or around light switches removes the difficulty of finding light switches in a dark room.

Our glow-in-the-dark egress tape is available in either roll or die-cut shape format. We offer this tape in 30 ft. rolls and can be cut to any width, with a maximum width of 46” for plain color and 23” for hazard chevrons. Die cuts can be produced quickly in many sizes and shapes; please get in touch with us to discuss your needs. For most specifications, we can make custom products with excellent lead times.

Our glow-in-the-dark material has been thoroughly tested. Light emission is measured by millicandela. If you require a data sheet, please enquire with our sales office.